Whenever you get behind the wheel, other than getting to wherever you are going, your primary concern is getting there safely. And to make sure you get there without a hitch, you need to check that your vehicle is working as it should.

So, before you set off, have you checked your hose clamps today?

Chances are, you haven’t or you might not even know what they are.

WHAT ARE HOSE CLAMPS?

Hose clamps secure hoses over fittings. The clamp prevents fluid from leaking at the connection, which is crucial for the smooth operation of a motor vehicle, pipe or water hose. And while nut and bolt clamps are often used for the same job, a hose clamp does a much better job.How do we get a good quality hose clamp? In the hose clamp manufacturing plant, a large number of hose clamps are produced every day to meet the large market demand.There are two ways to produce a large number of hose clamps, the first is manual and the second is machine. So what's the difference between a human and a machine?

As we all know, manual assembly is all processes, step by step manual operation, more than a dozen steps of cumbersome process, each link requires labor, requires a lot of manpower, material resources, the corresponding cost will increase a lot, in addition, manual efficiency is slow, but also because of the efficiency of each person is different, affect the shipment speed of the entire factory.

Therefore, in the age of automation, the convenience brought by machines is self-evident.Compared with the traditional manual control mode, the machine has many advantages such as stability, simple operation and so on. The work content is only to add semi-finished materials to the warehouse every 4 hours.
The production efficiency is about 1000 pieces/hour, and the working accuracy is much higher than that of manual production, which meets the production requirements of the new generation of throat hoop manufacturers. The production is controlled by a PLC microcomputer, which records all data, and is equipped with a human-machine interface, ensuring that most technical parameters can be set on the touch screen.

The machine can be fully automated assembly, simplifying the process, improving efficiency, and saving a lot of costs.Choosing a good fully automated machine is equivalent to four human workers. This is why Sinuowei has been focusing on the research and development, design and manufacture of machines for more than ten years. Because it can really change the traditional manual can not solve the problem.